5MM Gray 300# Metal Dia 22mm Hand Press Eyelet Mould Die Set Mold

Description

Note: The color of the item may vary slightly due to photography and your own computer
Feature:
This die set has two parts: top die and bottom die that is woking together with eyelet hand press punch machine tool.
The die mold is smart and durable and there is no maintenance needed.
Before installing corns buckle must first punch, this mold can only be installed in the hand press.
The die set is suitable for punching eyelet 5mm.
This die set is spare part of manual Grommet Machine.
The eyelet hand press punch machine is used together with this die mold to punch grommets on Flex Banner, mesh, tent, etc.
Specification:
Material:Metal
Color:Gray
Size: 300 #
Dealbestshop
Customer satisfaction is our pursuit
5MM Gray 300# Metal Dia 22mm Hand Press Eyelet Mould Die Set Mold
Note: The color of the item may vary slightly due to photography and your own computer
Feature:
This die set has two parts: top die and bottom die that is woking together with eyelet hand press punch machine tool.
The die mold is smart and durable and there is no maintenance needed.
Before installing corns buckle must first punch, this mold can only be installed in the hand press.
The die set is suitable for punching eyelet 5mm.
This die set is spare part of manual Grommet Machine.
The eyelet hand press punch machine is used together with this die mold to punch grommets on Flex Banner, mesh, tent, etc.
Specification:
Material:Metal
Color:Gray
Size: 300 #
Suitable Eyelet: 5mm
Top thread: M8
Dimension:35.6 x 22mm/1.4 x 0.87"(L x Dia)
Weight:85g
Note:
The die diameter of the hand die is 8 mm.
The diameter of the lower hole of the machine is 19 mm.
The lower die does not need to be tightened, just put it directly into the machine hole.
The upper mold is threaded and needs to be screwed into the machine.
Package Include:
1 x Hand Press Eyelet Mould
Item Specifics
Brand
Unbranded
Payment
Notice:
1. Due to battery is embargoed in air transport, all of our items have not battery.
2. Buyer need to pay the duties by themselves.
Dealbestshop
Customer satisfaction is our pursuit
Shop Category
Store Home
Other
Hot Item
10PCS 42mm Long RC Model Boat Waterproof Push Rod Rubber Seal Bellow
USD 9.40
5 Pieces 5x50mm K Type Thermocouple Sensors Cable Measure Range -100~1000°C
USD 24.30
4pcs Silver Alloy Body Post Mounts 1022037 for HSP RC 1/10 Car Upgrade
USD 7.60
10Pcs Synchronous Motor AC110-127V 5-6 r/min 50/60Hz CW/CCW 4W TYC-50 4KGF.CM
USD 73.48
10pcs Hard Plastic 12-Position Wire Connector Barrier Terminal Strip Block 10A
USD 17.23
5MM Gray 300# Metal Dia 22mm Hand Press Eyelet Mould Die Set Mold
Note: The color of the item may vary slightly due to photography and your own computer
Feature:
This die set has two parts: top die and bottom die that is woking together with eyelet hand press punch machine tool.
The die mold is smart and durable and there is no maintenance needed.
Before installing corns buckle must first punch, this mold can only be installed in the hand press.
The die set is suitable for punching eyelet 5mm.
This die set is spare part of manual Grommet Machine.
The eyelet hand press punch machine is used together with this die mold to punch grommets on Flex Banner, mesh, tent, etc.
Specification:
Material:Metal
Color:Gray
Size: 300 #
Suitable Eyelet: 5mm
Top thread: M8
Dimension:35.6 x 22mm/1.4 x 0.87"(L x Dia)
Weight:85g
Note:
The die diameter of the hand die is 8 mm.
The diameter of the lower hole of the machine is 19 mm.
The lower die does not need to be tightened, just put it directly into the machine hole.
The upper mold is threaded and needs to be screwed into the machine.
Package Include:
1 x Hand Press Eyelet Mould
Payment
Shipping
Returns
Customer Services
Notice:
1. Due to battery is embargoed in air transport, all of our items have not battery.
2. Buyer need to pay the duties by themselves.
Copyright of XXXX. All rights reserved.